Halcyon Coffee Fit Out

furnishing · 42 parts · v1 · made by player:01a09b3c-b65b-7634-b743-75e6abfd9d08 · as JSON

Halcyon Coffee Fit Out, Looking north. East is to the right. — **Front**
Looking north. East is to the right.

Halcyon Coffee Fit Out, Looking west. North is to the right. — **Right**
Looking west. North is to the right.

Halcyon Coffee Fit Out, Looking east. South is to the right. — **Left**
Looking east. South is to the right.

Halcyon Coffee Fit Out, Looking down. North is up the page. — **Top**
Looking down. North is up the page.

The four elevations share one scale, so a part standing proud of another is a step you can see rather than a number you have to work out. Every shape is drawn the way the client builds it — a wedge tapers, a cylinder is round — and a pixel shows whichever surface is nearest, so shapes that pass through each other are drawn as they will actually stand.

Review

fault 'back_shelf' and 'menu_board' are 1.5 cm apart — close enough to look like a join and far enough to see through.
fault 'shelf_line' and 'menu_board' are 1.5 cm apart — close enough to look like a join and far enough to see through.
fault 'rug' and the 17 parts with it form a group of their own: the nearest part of the main body, 'counter_top', is 4.48 m from 'rug'.
fault 'shelf_line' and the 1 part with it form a group of their own: the nearest part of the main body, 'counter_top', is 0.52 m from 'shelf_line'.
fault 'menu_board' and the 1 part with it form a group of their own: the nearest part of the main body, 'counter_top', is 0.6 m from 'menu_board'.
fault 'table_d' and the 2 parts with it form a group of their own: the nearest part of the main body, 'counter_top', is 3.48 m from 'table_d'.
fault 'stool_a1' and the 1 part with it form a group of their own: the nearest part of the main body, 'counter_top', is 8.26 m from 'stool_a1'.
fault 'stool_c2' and the 1 part with it form a group of their own: the nearest part of the main body, 'counter_top', is 8.26 m from 'stool_c2'.
fault 'stool_d1' and the 1 part with it form a group of their own: the nearest part of the main body, 'counter_top', is 3.76 m from 'stool_d1'.
fault 'stool_d2' and the 1 part with it form a group of their own: the nearest part of the main body, 'counter_top', is 3.76 m from 'stool_d2'.
fault 'leaf_a' and the 1 part with it form a group of their own: the nearest part of the main body, 'counter_top', is 3.1 m from 'leaf_a'.
fault 'leaf_b' and the 1 part with it form a group of their own: the nearest part of the main body, 'counter_top', is 9.48 m from 'leaf_b'.

These are checks, not a verdict: a design is allowed to be strange, and nothing here refuses anything. They also do not catch everything — a turned part, a round shape and anything that depends on what the author meant are outside what arithmetic can see, which is what the elevations above are for.

Parts

Part	Shape	Colour	Surface	Position	Size	Solid	Tag
`rug`	Cube	`#3f5568`	flat	`-1, 0.02, -3`	`9 × 0.04 × 6`	no	rug
`counter`	BeveledCube	`#7f5a30`	flat	`1, 0.53, 5`	`6 × 1.05 × 0.85`	yes	counter
`counter_top`	Cube	`#2c3138`	flat	`1, 1.1, 5`	`6.4 × 0.1 × 1.05`	yes	counter
`back_shelf`	Cube	`#e9e4da`	flat	`1, 0.95, 6.4`	`6.2 × 1.9 × 0.38`	yes	shelf
`shelf_line`	Cube	`#7f5a30`	flat	`1, 1.55, 6.3`	`5.8 × 0.07 × 0.52`	yes	shelf
`machine`	BeveledCube	`#9aa3ad`	flat	`-0.6, 1.46, 5.1`	`1.1 × 0.62 × 0.5`	no	machine
`grinder`	Cylinder	`#2c3138`	flat	`0.4, 1.4, 5.1`	`0.24 × 0.5 × 0.24`	no	machine
`pastry_case`	Cube	`#a9d3e2`	flat	`2.4, 1.37, 5`	`1.4 × 0.44 × 0.5`	no	case
`menu_board`	Cube	`#2c3138`	flat	`3.2, 2.1, 6.16`	`2.8 × 1 × 0.07`	no	sign
`menu_stripe`	Cube	`#f2a541`	flat	`3.2, 2.46, 6.11`	`2.4 × 0.16 × 0.05`	no	sign
`table_a`	Cylinder	`#b98a52`	flat	`-5, 0.74, -4`	`1 × 0.08 × 1`	yes	table
`stem_a`	Cylinder	`#6d7681`	flat	`-5, 0.37, -4`	`0.14 × 0.74 × 0.14`	no
`foot_a`	Cylinder	`#6d7681`	flat	`-5, 0.03, -4`	`0.5 × 0.06 × 0.5`	no
`table_b`	Cylinder	`#b98a52`	flat	`-1, 0.74, -4`	`1 × 0.08 × 1`	yes	table
`stem_b`	Cylinder	`#6d7681`	flat	`-1, 0.37, -4`	`0.14 × 0.74 × 0.14`	no
`foot_b`	Cylinder	`#6d7681`	flat	`-1, 0.03, -4`	`0.5 × 0.06 × 0.5`	no
`table_c`	Cylinder	`#b98a52`	flat	`3, 0.74, -4`	`1 × 0.08 × 1`	yes	table
`stem_c`	Cylinder	`#6d7681`	flat	`3, 0.37, -4`	`0.14 × 0.74 × 0.14`	no
`foot_c`	Cylinder	`#6d7681`	flat	`3, 0.03, -4`	`0.5 × 0.06 × 0.5`	no
`table_d`	Cylinder	`#b98a52`	flat	`-5, 0.74, 0.5`	`1 × 0.08 × 1`	yes	table
`stem_d`	Cylinder	`#6d7681`	flat	`-5, 0.37, 0.5`	`0.14 × 0.74 × 0.14`	no
`foot_d`	Cylinder	`#6d7681`	flat	`-5, 0.03, 0.5`	`0.5 × 0.06 × 0.5`	no
`stool_a1`	Cylinder	`#e4664f`	flat	`-6.1, 0.61, -4`	`0.44 × 0.1 × 0.44`	yes	seat
`leg_a1`	Cylinder	`#6d7681`	flat	`-6.1, 0.3, -4`	`0.11 × 0.6 × 0.11`	no
`stool_a2`	Cylinder	`#e4664f`	flat	`-3.9, 0.61, -4`	`0.44 × 0.1 × 0.44`	yes	seat
`leg_a2`	Cylinder	`#6d7681`	flat	`-3.9, 0.3, -4`	`0.11 × 0.6 × 0.11`	no
`stool_b1`	Cylinder	`#2fb5a6`	flat	`-2.1, 0.61, -4`	`0.44 × 0.1 × 0.44`	yes	seat
`leg_b1`	Cylinder	`#6d7681`	flat	`-2.1, 0.3, -4`	`0.11 × 0.6 × 0.11`	no
`stool_b2`	Cylinder	`#2fb5a6`	flat	`0.1, 0.61, -4`	`0.44 × 0.1 × 0.44`	yes	seat
`leg_b2`	Cylinder	`#6d7681`	flat	`0.1, 0.3, -4`	`0.11 × 0.6 × 0.11`	no
`stool_c1`	Cylinder	`#f2a541`	flat	`1.9, 0.61, -4`	`0.44 × 0.1 × 0.44`	yes	seat
`leg_c1`	Cylinder	`#6d7681`	flat	`1.9, 0.3, -4`	`0.11 × 0.6 × 0.11`	no
`stool_c2`	Cylinder	`#f2a541`	flat	`4.1, 0.61, -4`	`0.44 × 0.1 × 0.44`	yes	seat
`leg_c2`	Cylinder	`#6d7681`	flat	`4.1, 0.3, -4`	`0.11 × 0.6 × 0.11`	no
`stool_d1`	Cylinder	`#8b7bd8`	flat	`-6.1, 0.61, 0.5`	`0.44 × 0.1 × 0.44`	yes	seat
`leg_d1`	Cylinder	`#6d7681`	flat	`-6.1, 0.3, 0.5`	`0.11 × 0.6 × 0.11`	no
`stool_d2`	Cylinder	`#8b7bd8`	flat	`-3.9, 0.61, 0.5`	`0.44 × 0.1 × 0.44`	yes	seat
`leg_d2`	Cylinder	`#6d7681`	flat	`-3.9, 0.3, 0.5`	`0.11 × 0.6 × 0.11`	no
`pot_a`	Cylinder	`#dcd2c2`	flat	`7.9, 0.5, 4.6`	`0.8 × 0.55 × 0.8`	yes	pot
`leaf_a`	LowPolySphere	`#408c47` Leaves	flat	`7.9, 1.25, 4.6`	`1.2 × 1.2 × 1.2`	no
`pot_b`	Cylinder	`#dcd2c2`	flat	`-7.9, 0.5, -5.6`	`0.8 × 0.55 × 0.8`	yes	pot
`leaf_b`	LowPolySphere	`#408c47` Leaves	flat	`-7.9, 1.25, -5.6`	`1.2 × 1.2 × 1.2`	no

← every design